Menu
Menu
Menu
Problem due to an Alkalinity and pH not balanced, Poor Filtration or swimmers overload:
1. Analyze and adjust alkalinity at 100 ppm with TAC –. or TAC + and pH at 7.2, with MINORADOR pH o INCREMENTADOR pH POLVO.
160
140
100
80
O
ppm
pH
2. Make a backwash to the filter, if problem persist, review and check media filter. Renew it with LIMPIADOR SÍLEX or with LIMPIADOR DE CARTUCHOS.
Surface colorations:
1. Apply STAIN REMOVER near spots.
Removes stains stuck throughout the pool. It is applied directly to water.
2. Add immediately METAL REMOVER for orange- brown spots or COPPER STABILIZER for green or lilacs spots.
Stabilizes the oxidized iron typically orange colored water.
Removes copper that causes green hair and purple spots on the boards.
3. Adjust Alkalinity (100 ppm) and pH (7.2) and disinfectant (1.5 ppm).
160
140
100
80
O
ppm
pH
ppm
1. Check alkalinity (120 ppm) and pH (7.2), correct and adjust them.
pH
160
140
100
80
O
ppm
2. Add 10 g/m3 of SCALE PREVENTER once per month.
Excess of fats, sun creams or body oils.
1. Clean water line with WATERLINE CLEANER.
Spore contamination of the pool.
Brush the affected area with wire brush and apply stainless steel 1.5 L/100m³ BLACK ALGAECIDE.
Apply shock treatment with 75 g/m3 of OXÍGENO LÍQUIDO 12 together with 0.5 L/100 m³ of catalyst ACTIVATOR PLUS.
Resistant algae to disinfectants and algaecides.
1. Analyze phosphates level.
2. If is lower than 500 ppb apply PHOSPHATE REMOVER and if is higher than 500 ppb apply PHOSPHATE REMOVER PLUS.
3. Wait 8 hours and apply CONCENTRATED ALGAECIDE.
Pipe leak or swimming pool leak.
Apply 1 L/75m³ of LEAK SEALER.
Surface and aquatic insects. With tea tree essence.
Apply 0,75 L/100 m³ of INSECT REMOVER.
